Completely New End Mills Coming From Iscar Can Increase Productivity While Cutting Down Costs

Manufacturers and die & mold shops can banish chatter problems in several milling operations with Iscar's unique Chatterfree carbide end mills. The cutters' variable-pitch flute pattern annihilates harmonic vibration, the chief source of chatter. This permits faster cutting and superior finish in rough or finish slotting, shoulder milling and cavity milling. In addition, users also report prolonged edge life due to lowered chatter. The chatter-free feature is available in both solid carbide endmills and tips in Iscar's Multi-Master replaceable-tip line. Diameter range is 6 to 20mm for the solid carbide endmills, and 8 to 20mm for Multi-Master tips. These completely new endmills are perfect for reduced power machines with ISO40 or BT40 adaptations. The solid carbide version can conduct full slot machining up to 2xD. Depth capability on the replaceable-tip version is more constrained since the active length is shorter. In full slotting applications on alloy steel, the solid carbide foundation efficiently handles 0.03-0.05 feed rates at 180-220mm/min surface speed and 2xD depth of cut.

Finishred - Revolutionary Solid Carbide Endmills

Iscar is announcing the EFR.. B44 and the MM EFS.. Finishred a innovative solid carbide end mills family. The Finishred carbide endmill is a blending of both roughing and finishing endmills in a single tool. Roughing endmills remove metal from work pieces more rapidly and accurately than conventional endmills. However, roughing endmills leave grooves on the machined surface. In repercussion, after using a roughing endmill, a finishing endmill has to be used in order to obtain a smooth surface finish. This involves time-consuming tool change, setup time and inevitably of maintaining two endmill types in the inventory.

Capabilities of the Finishred Endmills:

The EFR.. B44 and the MM EFS.. endmills present 4 flutes with 45 degree helix, two serrated flutes and two continuous flutes.

The cutting edges of the finishing flutes are radially farther from the tool axis than the cutting edges of the serrated flutes. The finishing flutes phase out the grooves created by the roughing flutes, leaving a fine surface finish.

The tool is fully competent and allows running at rough machining parameters, resulting in finish surface quality.

The distinctive tool design reduces vibration at high load applications.

The tool creates short and long chips together. This chip mixture is evacuated more easily than each individual chip type, an extraordinary solution in slotting and cavity milling functions.

The Finishred is also obtainable with the Multi-Master indexable milling head option which merges the Finishred includes with the usefulness of little setup time, no regrinding costs and the ample range of shank and extension choices are presented for the Multi-Master milling heads.

A single tool incorporates the roughing and finishing endmills; therefore lowering stock.

Tool change and setup time can be waived.

An additional tool position is attained on the machine

New Chip Splitting Solid Carbide Endmills for Elevated Metal Removal Rates

ISCAR is introducing the ECP-3/4L family of chip splitting endmills. The innovative endmills are obtainable with 3 and four 38 degree flutes in grade IC900. They have 2xD and long shanks with lessened neck diameter, which facilitate machining along high shoulders, at high feeds. These endmills, due to their chip splitting feature and force distribution can be used very efficiently on low power machines (CAT40/BT40/ISO40). The serrated cutting edge includes flat peaks which leave a enhanced surface finish, in association to the current rougher carbide endmills. The ECP endmills are acceptable for machining austenitic and martensitic stainless steel, at up to 2xD depth of cut. They can be employed on alloyed steel as well. All of the preliminary tests conducted at various customers' locations showed exceptional results.

Brand New Cutters And Carbide Insert Compositions From Iscar To Better Improve The Machining Process
Iscar is introducing Penta 34 carbide inserts with a new PB chipformer. The PB chipformer features a single cavity with a positive rake, neutral shoulder angle, and a honed edge. It is actually a C-type chipformer with a different frontal edge.

A Couple Of Advancements In Carbide Inserts Coming From Iscar Over The Last Decade
Iscar is introducing a new unique milling system with tangential, clamped, butterfly-shaped LNKX carbide inserts. The butterfly-shaped insert has significant advantages compared to the current flat, square shapes. The new geometry has more cutting edges, positive rake face, reduced cutting forces resulting in higher performance.

The Newest In Carbide Endmill Configuration In A Long And Successful Family From Iscar
Manufacturers and die & mold shops can eliminate chatter problems in many milling operations with Iscar's new Chatterfree endmills. The cutters' variable-pitch flute pattern eliminates harmonic vibration, the main source of chatter. This enables faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling.

Iscar Announces A Brand New Family Of Slitting Cutters Applying Tang-Grip Technology And The Durability Of Sumo Tec Grades
Iscar now offers a family of high-performance slitting tools that combine the convenience and security of Tang-Grip clamping with the added durability of the new Sumo Tec insert grades. The concept, already proven successful in Tang-Grip parting tools, has now been extended to slitting cutters.

Iscar Recently Releases Many Revolutionary Lines To Continue Their Family Of Milling Cutters
Iscar recently released a new family of High Speed Milling adjustable endmills and facemills that will improve milling of aluminum, non-metallics, cast iron and hardened steel. This should prove especially useful in the automotive and aerospace industries.

Finding Out The Right Commercial Water Heater For You Requirements
If you are in the market for a commercial water heater then consider what the needed application is and your overall cost to determine which is best for you. Since there are so many to choose from you may have to do some calculating in order to match the need.

Brand New Land Rover Manufacturing Jobs
Britain's economy is trying to recover from the impact caused by the global economic recession through new Land Rover manufacturing jobs.

Choose A New Job Path With Jaguar And Land Rover.
Even if there is no formal education in medical school, new graduates planning to pursue such graduate careers can undergo training to cover the basics in health care to learn the non-specialized functions of the medical doctor.